Black clothes rack with cover, 1200 lb, 5 rods, 8 shelves

About this covered rack

We build this frame from thick steel tubing finished in a black powder coat, then enclose it in a heavy fabric cover. Wire shelves stiffen the uprights while the hanging rods take full coats and dresses. The front panel unzips and rolls up when you need access.

Steel tube frame

We use heavy steel tubing with diagonal side bracing across the uprights. The uprights connect to wire shelves that seat across the frame, keeping the whole unit square when loaded with seasonal coats and heavy storage boxes.

Enclosed fabric cover

The dense fabric cover slips over the assembled steel frame and zips closed down the front. It keeps direct light and dust off hung garments. You can roll the front panel up and tie it back during daily use.

Adjustable shelf clips

Slip sleeves lock onto grooved steel posts without bolts or wrenches. You can slide the wire shelves and hanging rods higher or lower along the uprights to leave room for long dresses above and folded blankets below.

Adjustable leveling feet

Threaded leveling feet sit under the corner posts to steady the frame on uneven floorboards or rough garage concrete. You turn each foot by hand until the bottom shelf sits level and the uprights stand straight.

Before you order

• Check the load rating against what you plan to hang or store.
• Measure the wall and ceiling height for the size above.
• Payment, delivery and returns are handled by the store that takes your order.