Black rolling clothes rack with cover, 2 rods, 3 shelves

About this covered rack

We built this unit for rooms without built-in storage. The steel frame holds clothes on hanging rods and wire tiers, while the zippered fabric cover pulls down over the whole assembly to keep light and grit away from the fabrics inside. It wheels across the floor and stops when you step on the caster brakes.

Full fabric enclosure

The fabric jacket wraps around the entire steel frame and fastens with zips down the front. You can roll the front panel up and tie it off while sorting through coats, then drop it down to close the unit against dust.

Removable hanging rods

We set steel rods into the frame for hangers, with open wire decking above and below for folded laundry and storage bins. If you need room for full length coats, take out the lower rod and shift the wire shelf down.

Locking wheel base

The casters thread directly into the base posts so you can guide the loaded rack across a flat floor. Step down on the foot brakes to hold the unit in place beside a wall, or swap the wheels for stationary leveling feet.

Grooved post assembly

The wire shelves and hanging supports lock around plastic sleeves snapped into grooves along each vertical post. The parts seat together by hand without bolts, giving you solid joints that keep the rack upright when fully loaded.

Before you order

• Check the load rating against what you plan to hang or store.
• Measure the wall and ceiling height for the size above.
• Payment, delivery and returns are handled by the store that takes your order.