Clothes rack with cover, 1200 lbs, 5 rods, 8 shelvesblack4.6368 ratings$199.95
Clothes rack with cover, 1150 lbs, 5 rods, 6 shelves, 76" wide
Thick steel tubing zipped inside a fabric cover keeps hanging garments and folded stacks away from light and dust.
$171.49
4.1out of 5 ยท 51 ratings
Price and stock are read from the store listing and can move without notice. The button opens that page in a new tab.
Holds1150 lbs
Width76"
Height77"
Depth18"
Hanging rods5
Shelves6
FinishBlack
What you are getting
We built this steel frame with both hanging rods and wire shelves, then wrapped it in a full fabric cover. The front zips shut to keep dust off your shirts, winter coats, and storage boxes. You assemble the entire structure by snapping plastic sleeves onto the grooved steel uprights without turning a single bolt.
- Rated to 1150 lbs spread across the frame, which is a full season of coats and denim with room to spare.
- Stands 77" tall and takes up 76" of wall, 18" deep. Measure the gap before you order.
- 5 hanging rods, so short and long garments each get their own line.
- 6 shelves for folded stacks, boxes and the shoes that never fit anywhere else.
- Zipped dust cover over the whole frame, so nothing collects gray.
Assembly: pins and connectors in the box, floor assembly, no drill.
Why it is built this way
Fabric dust cover
The high density fabric slips over the assembled steel skeleton, closing with a long front zip. Side pockets sewn into the exterior hold belts, scarves, or small accessories. It keeps garments shielded from direct sun and dust in an open bedroom.
Adjustable wire shelves
Slip sleeves snap onto the grooved corner posts to seat each wire shelf and rod. You choose where to set the shelf heights during setup, sliding clips up or down to leave clearance for long winter coats or stacked storage bins.
Black powder finish
The steel posts and crossbars receive a matte black powder coat over the metal. This finish resists everyday scuffs from wire hangers and hard shoe soles. It gives the frame a uniform dark tone behind the fabric enclosure.
No tool assembly
The posts connect through slip sleeves that wedge tighter as weight rests on the wire deck. You press the collars into the post grooves by hand and slide the shelves down over them, needing no wrench or screwdriver to complete the frame.
Three things people ask first
How much can it actually hold?
The frame is rated to 1150 lbs with the weight spread along the rail. That is a tested figure for the whole frame, not a guess, and it assumes the load sits across the span rather than hanging off one end.
Will it fit where I want to put it?
It needs 76" of wall and 18" of floor coming out from it, and it stands 77" tall. Chalk those three numbers on the floor before you order.
How long does it take to put together?
Most of our frames go together with the pins and connectors in the box, on the floor, in well under an hour. No drill and no wall fixing.
Other covered frames
Closest by load, one card per model.
Clothes rack with cover, 1200 lbs, 5 rods, 8 shelvesblack4.6368 ratings$199.95
Clothes rack with cover, 1100 lbs, 5 rods, 8 shelves, 75" wideblack4.4156 ratings$149.99
Clothes rack with cover, 1200 lbs, 6 rods, 12 shelvesblack4.627 ratings$169.99
Clothes rack with cover, 900 lbs, 5 rods, 8 shelveswhite4.363 ratings$169.97Clothes rack with cover, 1150 lbs, 5 rods, 6 shelves, 76" wide
$171.49