Straight to the racks
Raybee
Clothes rack with cover, 1150 lbs, white

Racks with covers

Clothes rack with cover, 1150 lbs

A white steel garment rack with adjustable tiers and hanging rods, fully enclosed by a zippered fabric cover with side storage.

$171.49

4.1out of 5 ยท 50 ratings

Price and stock live with our retail partner and can move without notice. The button opens their page in a new tab.

Holds1150 lbs
Width76"
Height77"
Depth18"
FinishWhite

What you are getting

We build this frame from steel tube finished in white powder coat. The posts notch into slip sleeves, letting you set shelf heights and hanging space to suit long coats or short shirts. When loaded, the fabric cover zips shut from the front to keep out ambient dust and light.

  • Rated to 1150 lbs spread across the frame, which is a full season of coats and denim with room to spare.
  • Stands 77" tall and takes up 76" of wall, 18" deep. Measure the gap before you order.
  • Zipped dust cover over the whole frame, so nothing collects gray.

Assembly: pins and connectors in the box, floor assembly, no drill.

Same frame, other finishes

Clothes rack with cover, 1150 lbs, blackblack

Why it is built this way

Enclosing fabric cover

The dense fabric slips over the assembled steel skeleton and zips down the front. It keeps direct sun and dust off garments, while stitched side pockets hold folded accessories or belts right on the exterior.

Adjustable wire shelves

Slip sleeves snap around the grooved uprights to hold each wire shelf firmly. You can space the tiers wide for tall storage bins or bring them closer together, depending on what sits on the lower deck.

Steel hanging rods

The hanging rods span the frame to support rows of hangers. Because they detach and adjust along the posts, you can divide the internal drop between long winter coats and shorter shirts on hangers.

Tool free frame assembly

You set this unit up without bolts or wrenches. The sleeves lock over the post grooves as you slide the shelf collars downward, creating a rigid junction that tightens under the load of your clothes.

Three things people ask first

How much can it actually hold?

The frame is rated to 1150 lbs with the weight spread along the rail. That is a tested figure for the whole frame, not a guess, and it assumes the load sits across the span rather than hanging off one end.

Will it fit where I want to put it?

It needs 76" of wall and 18" of floor coming out from it, and it stands 77" tall. Chalk those three numbers on the floor before you order.

How long does it take to put together?

Most of our frames go together with the pins and connectors in the box, on the floor, in well under an hour. No drill and no wall fixing.

Other covered frames

Closest by load, one card per model.

Clothes rack with cover, 1150 lbs

$171.49