Straight to the racks
Raybee
Clothes rack with cover, 1100 lbs, 5 rods, 8 shelves, 75" wide, black

Racks with covers

Clothes rack with cover, 1100 lbs, 5 rods, 8 shelves, 75" wide

Steel framing meets a full fabric zip enclosure, pairing open shelves and hanging rods under a matte black coat.

$149.99

4.4out of 5 ยท 156 ratings

Price and stock are read from the store listing and can move without notice. The button opens that page in a new tab.

Holds1100 lbs
Width75"
Height77"
Depth17.8"
Hanging rods5
Shelves8
FinishBlack

What you are getting

We built this freestanding closet around a powder coated steel skeleton and tailored a fabric shell over the top. The front panel zips shut to keep dust away from hung woolens and boxed shoes. You get hanging rods alongside stacked shelves without needing built-in cabinetry.

  • Rated to 1100 lbs spread across the frame, which is a full season of coats and denim with room to spare.
  • Stands 77" tall and takes up 75" of wall, 17.8" deep. Measure the gap before you order.
  • 5 hanging rods, so short and long garments each get their own line.
  • 8 shelves for folded stacks, boxes and the shoes that never fit anywhere else.
  • Zipped dust cover over the whole frame, so nothing collects gray.

Assembly: pins and connectors in the box, floor assembly, no drill.

Same frame, other finishes

Clothes rack with cover, 1100 lbs, 7 rods, 10 shelves, 75" wide, blackblackClothes rack with cover, 1100 lbs, 75.8" wide, whitewhiteClothes rack with cover, 1100 lbs, 75" wide, whitewhite

Why it is built this way

Steel tube and shelves

We form the posts and crossbars from alloy steel tubing, then lock in wire shelves that support stacked bins and heavy winter garments. The matte black powder coat shields the metal against daily scrapes.

Fabric zippered enclosure

The fitted fabric cover drops over the completed frame. Its front zipper runs from top to bottom so you can roll the door flap up while sorting laundry, then zip it down to block out dust.

Rods and side storage

Hanging rods span the upper frame for shirts and full length coats. Side pockets sewn directly into the outer fabric keep folded accessories, belts, or shoes off the floor and within easy reach.

Tool free frame assembly

The steel posts slip into their connectors by hand, forming a rigid box without wrenches or loose hardware. You build the shelving skeleton first, then pull the fabric cover over the top.

Three things people ask first

How much can it actually hold?

The frame is rated to 1100 lbs with the weight spread along the rail. That is a tested figure for the whole frame, not a guess, and it assumes the load sits across the span rather than hanging off one end.

Will it fit where I want to put it?

It needs 75" of wall and 17.8" of floor coming out from it, and it stands 77" tall. Chalk those three numbers on the floor before you order.

How long does it take to put together?

Most of our frames go together with the pins and connectors in the box, on the floor, in well under an hour. No drill and no wall fixing.

Other covered frames

Closest by load, one card per model.

Clothes rack with cover, 1100 lbs, 5 rods, 8 shelves, 75" wide

$149.99